Address:High Scien-tech Garden, Xiaoxiang,Wanjiang,Dongguan City,Guangdong,China Zip:523040
Lalser cutting machine CMA-1200H model The aim of the R&D of CM series laser equipments is to put the moving control into full play and therefore increase the working effects of laser processing. In each aspect, from the software design, mechanical structure to the configuration, the tenet is to serve for the processing to make sure the stability, precision and speed under the safe and overall quality-management working environment. There are two working places for the CMA-1200H, which can alternate automatically so that the machine can cut while feeding and the feeding time is greatly decreased. Therefore the CM series has become the best carrier for the industrial processing.
Adopting high quality stepping motor imported from germany
High speed USB2.0 port saves the computer resource
Memory card can save 128 files
Imported linear guide adopted to ensure the stable feeding
Manual switch easier to operate
Laser power：30-100W(Optional) Cutting speed:0~20m/min(plexiglass,others determined by materials) processing ares：1200mm×600mm Moving platform：2800mm(left to right1400mm) Resolution ratio：＜0.01mm Power supply:AC220V±10%,50HZ Location precision:±0.1mm Number of hanged line:60line Gross Power：＜1250W Operating temperature：0°C-40°C Operating humidity：5-95%(Free of condensed water) graphic format supported:BMP、GIF、JPGE、PCX、TGA、TIFF、PLT、CDR、 DMG、DXF。 Dimension：4500×1160×1170MM net weight：374 kg
Two working places can alternate vertically and enable the cutting while feeding
100% production increase, 10% material consumption decrease and no abrasion on the baseboard
Continuous circle cutting and the maxi circle cutting speed:30m/min
Laser power and speed can be matched automatically to ensure the best effects
USB2.0 high-speed port
Insulation system and high speed difference input and output electro circuit design can avoid the aberrance in distant signal transportation and realize the 12 working status output and 16 status input, which can easily connect with the working processing.
128 files can be save for the off-line computer work, which is proper for large quantity and repeat processing
Save the labour: one worker can operate more than 10 sets after training.
