
- It can charge any 2. 4-9.6 V Ni-MH battery pack which capacity is more than 1000mAh till 2400mAH
- The charger will cut off automatically if battery is fully charged according to the dv/dt check.
- MCU control the whole charge process and guarantee the battery pack get fully charge, avoid the battery pack over-charge.
- Led indicate the charge status, red led on in charging, green led on after fully charge. End charge by negative delta V or peak voltage detection, red led flash in error status.
Specification:
- Input: AC 100 -240V
- Output: 2. 4-9.6Vdc according to the battery pack
- Charging current: 900mA
Protection:
- Zero voltage battery protection.
- Short circuit protection.
- Battery pack reverse connect protection.
|
About CMO -
Leadership -
Investor Relations -
Contact us
Copyright Notice ® Copyright 2004-2007 Chinese Manufacturers Online All rights reserved. Tel: (001) 973-299-9888 Fax: (001) 973-299-9788 E-mail: info@chinesemol.com ![]() |